Best Mini Split Brands

Home/Easiest install

The easiest mini splits to install, ranked

Ranked by how much of the job one homeowner can actually finish alone, refrigerant, wiring and warranty paperwork included. What the box calls itself doesn't count.

The easiest mini split to install is the one where the factory already did the hard part. With the refrigerant sealed inside a pre-charged line set, nothing needs evacuating. You mount two units, drill one hole through the wall and hook up power. Power is where the leaders split. One needs a dedicated circuit wired in, and one just plugs into an outlet. The last two brands here are sold to homeowners but still need a flaring tool, a vacuum pump and gauges.

1

MRCOOL

Easiest to pick up locally

A no-vacuum, pre-charged install, sold off big-box shelves. You can pick one up the day you decide instead of waiting on shipping.

Line sets come in fixed lengths of 16, 25, 35 and 50 ft. Pick the shortest one that reaches, and figure out ahead of time where the extra will coil.

Watch out: The 115V 9K and 12K models have to be hard-wired to a dedicated 20 amp circuit. There's no plug option, so you'll always be wiring.

MRCOOL official site
2

Airspool

Easiest electrical hookup

It's the only system here that ships with a 120V power cord already attached. The Signature MS12 runs off an ordinary 15 amp outlet. The cold-climate SuperHeat HS12 needs a 20 amp NEMA 5-20R outlet, the kind with one sideways slot.

The line is a pre-charged twist-to-connect set, 10 ft included and up to 49 ft available. On 25 September both were on sale, the MS12 at $1,995 and the HS12 at $2,155.

Watch out: The included 10 ft only works if the outdoor unit sits almost right behind the indoor head. Price a longer line set before you compare totals.

Airspool official site
3

Pioneer

Easy only with your own HVAC tools

Pioneer is priced and sold for homeowners, but its line sets join on flare fittings. Finishing the install takes a vacuum pump, a micron gauge and manifold gauges. The manual calls for a triple evacuation and a vacuum hold of several hours.

If you already own that gear, it's good value.

Watch out: Coverage is one year unless you register within a week of installation, which bumps it to five. Labor isn't covered either way.

Pioneer official site
4

Senville

Hardest route to a covered DIY install

Flare fittings like Pioneer, with the same evacuation and gauge work. The AURA line is rated to -22 F. LETO is the entry range and heats down to about 5 F.

Low prices make it look like a sensible first project. That's the trap.

Watch out: A homeowner install voids Senville's warranty. Add a licensed tech's fee before you compare its price with a pre-charged system.

Senville official site

Common questions

What is the easiest mini split to install?

A pre-charged quick-connect system, because there's no refrigerant work at all. In that group, MRCOOL offers the most sizes, and Airspool's factory-fitted cord takes wiring out of the picture on its 12K models. Anything that joins with flare fittings and a vacuum pump is a much bigger job.

What tools does a DIY mini split install need?

For a pre-charged system you'll want a drill with a hole saw of roughly 3 inches, a level, a stud finder, wrenches, and a torque wrench to hit the fitting values in the manual. A flare system adds a flaring tool, a vacuum pump, a micron gauge and manifold gauges.

Can a mini split plug into a regular outlet?

A few can. Airspool's MS12 uses a standard 15 amp outlet and its HS12 a 20 amp NEMA 5-20R. Most 115V mini splits aren't built that way. MRCOOL's are hard-wired to a dedicated 20 amp circuit.